High-speed direct-drive overlock sewing machine

ZJ880/-BD series

Overlock  /  ZJ880/-BD
     
 
 

ZJ880 Series are suitable for the light, medium and heavy material, include knitting, underwear, jeans and bedding material etc. It can both suit for narrow edge and wide edge sewing.
Using direct drive motor,can effectively reduce the noise and vibration
Computer-controlled with automatic thread trimmer, automatic waste suction and presser foot, can improve the efficiency of labor.
Without belt transmission, can effectively prevent the pollution of sewing material
With servo motor, can energy saving

Green

 
 

 

Adopts main shaft direct drive technology without belt drive.

 

 

Low noise

 
 

 

Small vibration, low noise, less wear and avoid contamination of fabric

 

 

High Speed

 
 

 

The speed can be adjusted from 0 to 7000rpm,low increase of temperature, and stable running.

 

 
 

Up-to-date feed dog rack sealing device and straight-needle forced oil return

 

This is an entirely sealed machine with direct oiling solution to oiling system, can get the oil recovery. Automatically oiling system with filter pump. To prevent the materials being polluted by the oil sludge,is added to clean the oil sludge from lubrication. (The yellow is the sealing ring). (Old model only have two pieces, but ZJ880-BD series have four pieces)

 
 

Patented presser foot

 

Machine of the series are equipped with the up to date patented presser foot whose independent fabric hole down piece can be adjusted rightward/leftward as per the changes in cup seaming width such that the edge surling can be effectively avoided during high speed sewing operation.

 

 

Direct Drive Servo Motor

 

 

Most motors work through belts, the main reason of noise and breaks over time.

With the Direct Drive Servo Motor that does not happen, because its transmission system is connected directly to the main shaft of the machine, eliminating the need for belts or pulleys. Thus it provides an increase in efficiency with quick startup, the precision of the brake and longer lifetime.

The direct drive motor can save up to 70% energy compare with the clutch motor, for working only when the machine is sewing.
The lower power consumption helps reduce bills and also environmental impact.

 

Optional assessories:


 

KH/horizontal auto air-indraft thread trimming device


The thread cutting part is located horizontally behind the needle plate; when sewing operation is over, compressed air is utilized to suck in and cut off the thread loop, such that the manual thread cutting time is saved and the working efficiency is improved

 

 

KS/vertical auto air-intake thread cutting device


The thread cutting port is located vertically to right rear of the needle; when sewing is over, compressed air is utilized to suck in and cut off the thread loop, such that the thread cutting time by hand is saved and the working efficiency is improved

 

 

Vacuum bits suction device


With the aid of compressed air, waste materials occurred during sewing are collected into a cloth bag so as to guarantee the cleanliness of the working environment.

 

 

Pneumatic presser foot lifting device


Compressed air is utilized to drive the cylinder to realize presser foot lifting such that the labor intensity is reduced.

 

 

Micro-computerized pulling-force tape feeder MC/E8U


The tape feeding speed is under the control of a micro-computer such that it is synchronous with the fabric feeding action, ensured that the cloth can be fed uniformly and loosely during sewing operation, improved the sewing quality, reduced the dependence to the workers'skill level, and the labor intensity.

 

 

Tape/fabric feeding machine MDK62


The tape feeding speed is under the control of a mechanical device so as to ensure that the cloth can be fed uniformly and loosely during sewing operation, improved the sewing quality, reduced the dependence to the workers'skill level, and the labor intensity

 


 

  
Model No.of Needles Material Needle Sewing Speed Stitch Length
ZJ880-4-02X250-BD 2 DC×27 11# 6000 (rpm) 0.5~3.8 mm
ZJ880-3-01-BD 1 DC×27 11# 7000 (rpm) 0.5~3.8 mm
ZJ880-4-181-BD 2 DC×27 11# 6500 (rpm) 0.5~3.8 mm
ZJ880-3-180-BD 1 DC×27 11# 6500 (rpm) 0.5~3.8 mm
ZJ880-3-16S2-BD 1 DC×27 11# 6000 (rpm) 0.5~3.8 mm
ZJ880-6-355-BD 3 DC×27 14# 6000 (rpm) 0.5~3.8 mm
ZJ880-5-86A-BD 2 DC×27 21# 6000 (rpm) 1.3~5 mm
ZJ880-5-70A-BD 2 DC×27 14# 6000 (rpm) 0.5~3.8 mm
ZJ880-5-38A-BD 2 DC×27 14# 6000 (rpm) 0.5~3.8 mm
ZJ880-4-13H-BD 2 DC×27 11# 6000 (rpm) 0.5~3.8 mm
ZJ880-3-17A-BD 1 DC×27 11# 6000 (rpm) 0.5~3.8 mm
ZJ880-4-02X250 2 DC×27 11# 6000 (rpm) 0.5~3.8 mm
ZJ880-3-01 1 DC×27 11# 7000 (rpm) 0.5~3.8 mm
ZJ880-4-181 2 DC×27 11# 6500 (rpm) 0.5~3.8 mm
ZJ880-3-180 1 DC×27 11# 6500 (rpm) 0.5~3.8 mm
ZJ880-3-16S2 1 DC×27 11# 6000 (rpm) 0.5~3.8 mm
ZJ880-6-355 3 DC×27 14# 6000 (rpm) 0.5~3.8 mm
ZJ880-5-86A 2 DC×27 21# 6000 (rpm) 0.5~3.8 mm
ZJ880-5-70A 2 DC×27 14# 6000 (rpm) 0.5~3.8 mm
ZJ880-5-38A 2 DC×27 11# 6000 (rpm) 0.5~3.8 mm



  • ZOJE SEWING MACHINE CO., LTD. Damaiyu Development Zone | Taizhou, Zhejiang 317604 | China